THIS RECIPE MAKES 2 GALLONS OF HARD CIDER.
BLUEBERRY HARD CIDER RECIPE KIT
Run wild and untamed with the uncontrollable flavor of this fruity hard cider...be careful not to be seduced by its blueberry essence! BrewDemon® uses only 100% New Zealand apples to provide the optimum flavor profile for world-class hard cider.
- (1) can of Forbidden Fruit Hard Cider Mix
- (1) can of Blueberries in Syrup
- (1) packet of Dry Hard Cider brewing yeast
- (1) packet of One Step No-Rinse Cleanser
You will need
- 1 1/2 cups of Granulated Sugar
- A Blender
You will need a blender for this recipe. Each recipe includes a packet of One Step No-Rinse Cleanser, enough to sanitize all your equipment during brewing and bottling. Sanitize everything that will come in contact with your cider before making this recipe.
2 GALLON INSTRUCTIONS FOR THIS RECIPE
Recipe requires a blender. Thoroughly clean and sanitize all equipment (including blender) by following the steps outlined in the instructions that came with your kit (you can find these instructions by clicking the "Help Desk" link at the top of the page).
This recipe contains everything you need for fermentation. Just follow the instructions below. Since your hard cider is mostly water, the better the water the better your cider. This step should take about 30 minutes.
- 2.1. Remove the black lid from your cider mix and stand both cans in a tub of hot tap water. This will help them pour more easily.
- 2.2. Puree your fruit in sanitized blender.
- 2.3. Fill your fermenter with a gallon of cold water. For best results, use bottled spring water or charcoal-filtered tap water.
- 2.4. Place 4 cups of water into a clean 3-quart pot and bring to a boil.
- 2.5. Remove from heat. Then slowly stir in 1 1/2 cups of granulated sugar and your can of hard cider mix until fully dissolved. This mixture is called the must.
- 2.6. Pour the “must” into the fermenter. Bring the volume of the fermenter up to the 8.5-quart mark by adding more water, then add your pureed fruit. Mix thoroughly. Read the thermometer and wait until the temperature of the must is between 64°- 82° F before adding the yeast.
- 2.7. Add the yeast. Then attach your lid.
- 2.8. Place the fermenter out of direct sunlight and maintain a temperature between 64°- 82° F for approximately 7 days.
After 7 days the cider in your fermenter should have stopped fermenting and begun to clear. It’s now time to bottle! If you’re not sure, draw a small amount from the tap; if it tastes like flat hard cider, it’s ready to bottle. If it tastes sweet, give it a few more days.
Follow the steps outlined in the hard cider instructions that came with your kit (you can find these instructions by clicking the "Help Desk" link at the top of the page).
FOR BEST RESULTS CONDITION FOR 1 TO 2 WEEKS.